How to Get Gorilla Glue Out Of Carpet - cleanerstalk.com

How to Get Gorilla Glue Out of the Carpet (Effortlessly)

Cleaners Talk is reader-supported. This post contains affiliate links, we may earn a commission at no additional costs to you. As an Amazon Associate we earn from qualifying purchases.

Gorilla glue is a household product used for everything from crafts to repairs. It surely comes in handy when trying to fix wood, stone, or china. But its strong adhesive properties can be a nuisance if you spill some on the carpet. If this has happened to you, you may be wondering how to get Gorilla Glue out of carpet.

Time Is of the Essence

If you spill Gorilla Glue on the carpet, you need to act immediately. The more recent the spill, the more luck you will have getting it out of the carpet. Otherwise, it risks bonding the carpet fibers together.

Ideally, you’ll notice the Gorilla Glue on your carpet when it’s still liquid. In that case, you can sop it up with a towel. Since you’re mopping up Gorilla Glue, it will harden onto the towel instead of the carpet.

If the glue is no longer liquid, you may need to work harder to remove the glue.

Before we explore how to get Gorilla Glue out of carpet, take note that depending on the material, some of these solutions may damage the carpet, even as they remove the glue. To minimize damage, always test out your glue-removal solution on an inconspicuous piece of the carpet or rug.

Use an Iron

One way to remove Gorilla Glue from your carpet is by using an iron. The heat helps soften the glue.

This method is excellent for long, thick carpets. However, if there’s any plastic mixed into your carpet fibers, this probably isn’t the best solution because you risk melting the carpet, as well as the glue. In this case, it is vital that you test the technique somewhere inconspicuous before starting.

Once you’re sure you can use an iron on your carpet, you can start. Scrape the hardened Gorilla Glue with a knife. Depending on how much glue spilled and how hard it is, you may have to scrape for some time.

Once you’ve removed as much glue as possible, place an old cloth over the spill. Turn the iron on and hold it over the cloth or towel. This will help soften the glue and allow your rag to absorb it.

When you finish, set the towel aside. Take care to keep the glue-soaked side off the carpet. If any Gorilla Glue remains on the carpet, cut the tips of the fibers with glue residue away.

Try Vinegar and Dish Soap

Another solution is to apply vinegar and dish soap to your carpet. This solution is particularly effective if you are afraid of melting or damaging the carpet with an iron.

Start as you would with any other method. If the glue is damp, mop it up. If not, take your all-purpose knife and gently scrape the stain until some of the glue lifts.

Next, soak a cloth or paper towel in vinegar and dab the carpet for at least one minute.

Give the vinegar 15 minutes to dissolve the Gorilla Glue adhesive. While your vinegar dissolves adhesives, mix a dish soap and water solution. The ratio you need is one tablespoon of soap to one cup of warm water.

When the vinegar has done its job, dip the cloth in the dish soap solution and apply it to the carpet to remove the Gorilla Glue. Scrub until the glue comes away.

If the stain is stubborn, you may need to repeat this process several times.

Use Ammonia

If the iron doesn’t work and vinegar can’t get Gorilla Glue out of the carpet, try something stronger.

Ammonia is a strong household chemical that works to break down gunk and grime. When using ammonia it is important to understand its potentially harmful properties and take the proper safety precautions.

Mix one teaspoon of ammonia into a cup of warm water and stir well.

Before continuing, wear gloves because ammonia can damage the skin. Gloves on, take a towel, and dip it in the solution. Then, apply it to the Gorilla Glue. Continue blotting and scrubbing until the glue comes off the carpet. Ammonia shouldn’t bleach the carpet.

It’s often used to brighten clothes during laundry washes. Even so, it’s still worth experimenting on the underside or the corner of your carpet to see how the fabric reacts before you start.

Try Using Acetone

The great thing about Acetone is that you probably have it in the house without realizing it. Find a bottle of nail polish remover, arm yourself with a paper towel, and start scrubbing.

Here’s what to do.

As ever, if the glue is still soft, begin by blotting as much as possible as quickly as possible. Using an old towel is best because as the glue hardens, a paper towel may end up sticking to the carpet.

Using a cotton ball, tip some nail polish remover onto the cotton, and apply it to the carpet.

If the cotton starts to dry or harden from glue, replace it with a fresh cotton ball.

Ideally, you can keep doing this until the glue separates from the carpet. If it doesn’t work, switch to ammonia to see if it helps dissolve the glue faster. Then you can resume the acetone treatment.

When you do remove the Gorilla Glue from the carpet, wash it thoroughly to remove the acetone and pad it dry. Remember, if you have pets in the house, you may want to keep them away from the spill until you are sure the acetone and ammonia are gone, as these can be harmful to animals.

Conclusion

If you’ve never experimented with how to get Gorilla Glue out of carpet, it can be tricky. However, there are several effective household remedies you can try.

Never forget to experiment before you start to make sure your method of choice won’t exacerbate the damage to your carpet. And if you do spill Gorilla Glue on the carpet, don’t hesitate. The sooner you act, the easier it is to get Gorilla Glue out of the carpet.