Coredy Robot Vacuum Not Charging? Here’s the Solution

Cleaners Talk is reader-supported. This post contains affiliate links, we may earn a commission at no additional costs to you. As an Amazon Associate we earn from qualifying purchases.

Coredy robot vacuums are consistent best-sellers on Amazon due to their affordable price and reliable quality. Unfortunately, like most robot vacuums on the market, sometimes it won’t charge properly.

If your Coredy robot vacuum is not charging, check the charging contacts on the robot and the charging base and make sure they are clean. Dirty charging contacts may interfere with the charging process.

You should also make sure that there is enough space for the Coredy robot vacuum to reach the charging base and rotate itself to charge. Obstacles can prevent the robot from reaching the charging base.

That said, there are a total of 5 possible reasons why your Coredy robot vacuum is not charging. Here, we’ll provide a solution for each cause. By the end of this post, your Coredy robot vacuum should charge normally.

Why Robot Vacuum Going in Circles
Why Robot Vacuum Going in Circles
Why Robot Vacuum Going in Circles
  1. Now Playing
    Up NextWhy Robot Vacuum Going in Circles
  2. Now Playing
    Up NextThink Twice Before Adding These to a Steam Cleaner
Why Robot Vacuum Going in Circles

5 reasons why your Coredy robot vacuum is not charging

There are 5 possible reasons why your Coredy robot vacuum is not charging. The most common reason is dirty charging contacts. Here are the 5 reasons explained in detail, along with the solutions:

1. Dirty charging contacts

First things first, check the charging contacts (both on the bottom of the robot and the charging base). The charging contacts on the robot and the charging base need to make a clean connection to perform a charge.

Dirty charging contacts hinder electrical current, reducing the effectiveness of the charging process from the charging base to the robot. Make sure the charging contacts are clean and you’re good to go.

If you see a glaring layer of dust, oil, or grime on the charging contacts, wipe them with a clean microfiber cloth. You can also use a Magic Eraser to remove stuck-on dirt that is more stubborn.

Lastly, make sure the charging contacts are not corroded, especially if you have been using your Coredy robot vacuum for some time. If this is the case, contact Coredy customer’s support to get your robot checked.

Remember, the most common reason why a Coredy robot vacuum is not charging is dirty charging contacts. As your robot moves around your house, dust and debris will inevitably get stuck on the charging contacts.

2. The charging base is no longer working

When was the last time you replaced the charging base? Have you been using it for several years? Your Coredy robot vacuum may not charge because the charging base is no longer working.

Before you panic, make sure the charging base is working. The indicator light should turn on if the charging base is plugged in. If the charging base is no longer working, you need to replace it.

Replacement Charging Dock Station for Coredy R300, R380, R400, R550, R650, R580, R750, G800, G850

Replacement Charging Dock Station for Coredy L900, L900W

3. The charging base is not accessible

If you’ve made sure the charging contacts are clean and the charging base is working, but your Coredy robot vacuum still won’t charge, maybe the charging base is not accessible by the robot.

Make sure that there is enough space for the Coredy robot vacuum to reach the charging base. Place the charging base against the wall and make sure it is in an open and uncluttered area leaving at least:

  • 6 feet (2 meters) in the front of the charging base.
  • 3 feet (1 meter) on both sides of the charging base.

If you do not provide enough space in front and around the charging base, the Coredy robot vacuum may have trouble finding its way home and stop midway because its battery is too low to move.

4. The battery is not able to hold a charge anymore

Alternatively, it could be that the battery is no longer able to hold a charge.

A Coredy robot vacuum runs on a Lithium-ion battery, which has a limited lifespan. On average, a Lithium-ion battery lasts about two to three years or 300 to 500 charge cycles, whichever occurs first.

If your Coredy robot vacuum is no longer able to hold a charge after 2 or 3 years, it means that the battery has run its course and needs a replacement. You need to buy a new battery.

Use only rechargeable battery packs with the correct specification approved by Coredy. You can buy either the 2600mAh battery or the 3200mAh battery on Coredy’s official website.

5. You are using a faulty electrical outlet

Last but not least, it may be that you are using a faulty electrical outlet to charge the Coredy’s charging base. It may sound simple, but some people ignore the idea that the problem lies with the electrical outlet, not their device. Take one minute to make sure that you are using a functional electrical outlet.

The Coredy robot vacuum’s charging base has an indicator light at the top. If the indicator light on the Coredy charging base does not light up, test the outlet with something else, like a phone charger.

FAQ on Coredy robot vacuum charging

Below are some of the most frequently asked questions surrounding a Coredy robot vacuum and charging its battery. We will always add new questions to the list so you may want to bookmark this page.

1. How do you charge a Coredy robot vacuum?

To charge a Coredy robot vacuum, connect the charging base to an electrical outlet. Tuck in any extra cord length into the bottom of the charging station so the robot vacuum doesn’t try to eat it.

Connect the Coredy robotvac to the charging base (the contacts on the base must connect to the contacts on the robot). The indicator light will blink pink while charging and turn solid blue when fully charged.

2. How long does it take a Coredy robot vacuum to charge?

It takes approximately 5 hours to fully charge a Coredy robot vacuum from 0% battery to 100% battery. However, it will take much less time if the robot vacuum’s battery is not fully depleted.

3. How long does the Coredy battery last?

A fully charged Coredy robot vacuum battery is advertised to last 120 minutes in Auto mode and 100 minutes in Max mode. In reality, the Coredy robot vacuum battery lasts 70 minutes in Max mode.

Related articles: