Can You Clean Carpet With Pine-Sol? Yes, Here’s How

Cleaners Talk is reader-supported. This post contains affiliate links, we may earn a commission at no additional costs to you. As an Amazon Associate we earn from qualifying purchases.

The Pine-Sol Multi-Surface Cleaner is designed to power through tough dirt, grease and grime on a wide variety of surfaces. But can you actually remove stains and clean carpet with Pine-Sol?

You can clean carpet stains with Pine-Sol. In fact, you can spot-treat grease, tackle stubborn dirt stains, and refresh your carpet with Pine-Sol. All you have to do is to rub in a splash of Pine-Sol where needed. Just be sure to test on an inconspicuous area first before applying Pine-Sol.

That being said, there are several important things to consider when using Pine-Sol to clean carpet stains. In this article, you will learn everything you need to know about using Pine-Sol on carpets.

Does Pine-Sol stain or damage carpet?

Not every carpet is made with the same materials and fibers. Because of this, not every carpet cleaning solution either store bought or homemade will work to treat stains on your particular carpet.

If your carpet is not colorfast (colored dye leaking out of the carpet), Pine-Sol can cause discoloration in certain spots. It’s important to check Pine-Sol in a hidden area of the carpet.

To test for colorfastness, apply a couple of small drops of Pine-Sol to the carpet in a hidden area. Wait a few seconds and grab a white cloth or paper towel, and apply some pressure to the solution for about 10 seconds. If there is dye on the cloth or paper towel, you cannot use Pine-Sol on your carpet.

If you are not sure, it is a good idea to seek the advice of a trained carpet cleaning professional, especially if you are not sure what type of carpeting is in your home if you were not the original buyer.

How to clean carpet stains with Pine-Sol

Pine-Sol Multi-Surface Cleaner (Pack of 3)
CloroxPro Pine-Sol Multi-Surface...
Pine-Sol Multi-Surface Cleaner (Pack of 3)
CloroxPro Pine-Sol Multi-Surface...

Now that you’ve made sure your carpet won’t color bleed, you can move on to the process of treating the stain with Pine-Sol. Here are the step-by-step guide on how to clean carpet stains with Pine-Sol:

1. Test Pine-Sol in an inconspicuous area

Before you add a splash of Pine-Sol to a stained area on the carpet, it is wise to first perform a spot test. Dab some Pine-Sol on a small, inconspicuous area of the carpet and wait for a few minutes. If there is no discoloration, you can continue to the next step. Otherwise, do not use Pine-Sol.

2. Soak the carpet stain with Pine-Sol

Rub in a splash of Pine-Sol on the stained area of the carpet. Pine-Sol is great for spot-treating grease or heavy dirt marks, or for an all-around refresh. You should be able to see that the spot is fully saturated.

Let the Pine-Sol sit for at least 10 minutes so that the solution can get into the stain and work its magic, releasing its grip on the fibers of your carpet. You don’t need to rub, just let the Pine-Sol sit on the stain.

3. Wipe the area down with water

Now that the stain has been lifted from the carpet, it’s time to wipe the area down with water. This step is pretty straightforward. All you have to do is take a damp microfiber cloth and wipe the stained area.

4. Dry the wet area thoroughly

Once the stained area of the carpet has been wiped down, it’s time to dry it. Use a dry microfiber towel or paper towel to gently dab on the wet area. You can also use a fan to speed up the drying process. If your carpet is indoors, you can also open the windows to let cool air inside the house.

5. Use a carpet cleaning machine (optional)

If you have a carpet cleaning machine, you can use it in tandem with Pine-Sol. Once you’ve treated the stain with Pine-Sol, use your carpet cleaner to suck up any remaining moisture from the carpet.

While using the machine is optional, a carpet cleaning machine is an amazing investment if you have plenty of carpets to clean around the house. If you need one, a great product is the Bissell Little Green. It is not too big, yet it removes tough stains from carpets with ease. You won’t be disappointed.

Bissell Little Green Full-Size...
  • Now with the self-cleaning hydrorinse tool; Power Cord Length: 15'
  • Compact deep cleaner for small and large clean-ups.The item weight is 12 pounds (5.4 kg). The power rating is 3 Amps
  • Strong spray and suction remove tough stains and spills, cleans and helps dry in 1 step. Hose Length is 4'


Now you know whether you can clean carpet with Pine-Sol or not. As you can see, treating carpet stains with Pine-Sol is super easy. Just remember to test for colorfastness before using Pine-Sol on your carpet. 

Related articles: